KUET Institutional Repository

Browsing Faculty of Mechanical Engineering by Title

Browsing Faculty of Mechanical Engineering by Title

Sort by: Order: Results:

  • Impingement Heat Transfer Due to Circular Air Jet Over Rough Flat Surfaces 
    Islam, Md. Nurul (Bangladesh Institute of Technology (BIT), Khulna, 2000-08)
    An experimental investigation was carried out to investigate the pressure distribution and the local and average Nusselt number due to impinging of a circular air jet over uniformly heated rough flat surfaces. The present ...
  • Improvement of Aerodynamic Characteristics of an Airfoil by Static Extended Trailing Edge 
    Islam, Md. Shariful (Khulna University of Engineering & Technology (KUET), 2017-04)
    The objective of this work is to study the SETE as an alternative flow control technique for lift enhancement at a small drag penalty in cruise flight. The geometrical quantities, chord distribution and other properties ...
  • Laminar Slot Jet and Slot Jet Impingement Heat Transfer 
    Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Modeling and Analysis of Labour Cost Estimation for Ship Repairing: A Case Study in Chittagong Dry Dock Limited 
    Karim, Mohammad Sajedul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    With the increase of international trade activities through sea and resulting exponential growth of number of ships calling on coastal nations’ ports, ship repair is becoming an increasingly attractive opportunity for ...
  • Modeling of Electrochemical Grinding Process 
    Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Modeling to Integrate the International Standards with Total Quality Management Philosophy 
    Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2021-01)
    The aim of the present study is to develop an Integrated Management System (IMS) and its implementation framework for RMG industries of Bangladesh. RMG industries are using several management standards in their organizations ...
  • A New Concept in Modern Industry Sector, “Virtual Industry Model” 
    Badiuzzaman, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-12)
    Virtual office has become a popular and desired office management system for technologybased low-cost office management system. This virtual management system is a new way of working that enables the virtual worker to ...
  • Numerical Investigation of Stress Field for Anisotropic Elastic Bonded Joints 
    Mamun, A. H. M. Abdullah Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-03)
    In recent years, intelligent or smart structures and systems have drawn more and more attention. Bonded structures are playing a key role as active components in many fields of engineering and technology. Mechanical stress ...
  • Numerical Modeling on Solid Cone Nozzle without a Vane Swirler 
    Pervin, Mst. Shahin Akter (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2006-12)
    The performance parameters like the coefficient of discharge Cd and the spray cone Angle W of a swirl spray solid cone nozzle without a vane swirler have been studied numerically. The numerical computation of flow through ...
  • Occupational Safety Problems in Bangladesh Ship breaking Industry - a case study 
    Kamruzzaman, Abu Sayed Md (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Ship breaking is one of the most hazardous and dangerous occupation. Grave concern about the occupational safety and health problems caused by ship dismantling has been widely reported . Whilst many press articles have ...
  • Optimal Planning of Store Allocation and Assignment of Spare Parts in a Warehouse 
    Sultana, Mosammat Ferdaushi (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-09-06)
    Unscientific method of store allocation and assignment of spare parts in warehouse has been one of the major factors that have been causing loss in many companies. To keep pace with the competitors the modern managers ...
  • Optimization of Investment Casting Parameters to Improve the Mechanical Properties by Taguchi Method 
    Mondal, Nil Ratan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    In this present study investment casting process parameter is optimized by using Taguchi approach to improve the mechanical properties of mild steel. A set of experiments were conducted as per Taguchi's L9 orthogonal array ...
  • Optimization of Multi-Item Inventory System 
    Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Inventory is the lifeblood of a business organization. Industry uses various types of materials for its smooth running. A significant amount of total assets is invested as inventory. In many companies, the management has ...
  • Optimization of Sand Casting Parameters for Reducing Casting Defects Using Taguchi Method and Casting Simulation Technique 
    Sultana, Mst. Nazma (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2017-03)
    The aim of the present work is to reduce the rejection rate of cast products in a foundry shop due to casting defects in sand casting process using a statistical tool namely Taguchi method and a computer aided simulation ...
  • Optimization of Vehicle Routing in a Supply Chain 
    Mondol, Md. Kburram Bin Abdul Kayum (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Supply chain is a sequence of organizations- their facilities, functions and activities that are involved in producing and delivering a product or service. The sequence begins with basic suppliers of' raw materials and ...
  • Planning of Ordering Policy for Logistics Department of a Barge Mounted Power Plant 
    Roy, Bhola Nath (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-02-26)
    Today, material management has gained acceptance in all developing economics. As material is nothing but money in the form of goods, each industry uses materials for its smooth running. A Power Plant is a public-interest ...
  • Plant Layout of Cement Industry for Mass Production 
    Alam, Md.Ekhtiar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2010-08)
    Plant layout is the lifeblood of an industry as well as of any cement industry for its manufacturing process and layout design. A cement industry uses various types of machinery and equipment for its smooth operation. ...
  • Predicting the Effects of Process Parameters on Weldment Characteristics in MIG Welding using Artificial Neural Networks 
    Saha, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-12)
    In this project work an attempt has been taken to predicting the effects of process parameters on weldment characteristics in MIG welding with the help of artificial neural network technique. Electrode wire diameter, ...
  • Production of Liquid Fuel from Rice Husk and Sawdust 
    Islam, Md. Kamrul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)
    Energy is the key input to economic growth of a nation and there is a close relation between accessibility of energy and escalation in the quality of nation. As conventional energy sources are limited and will diminish ...
  • Prototype Development of a Joint Padded Metatarsal Cup to Enhance Female Foot Musculoskeletal Safety 
    Jor, Abu (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    This study investigated the feasibility of joint padded metatarsal cup on plantar pressures and stress distribution in the bone alignment of female foot with high heeled footwear during balanced standing. The aim of this ...

Search KUET IR


Browse

My Account