KUET Institutional Repository

Browsing Faculty of Mechanical Engineering by Title

Browsing Faculty of Mechanical Engineering by Title

Sort by: Order: Results:

  • Occupational Safety Problems in Bangladesh Ship breaking Industry - a case study 
    Kamruzzaman, Abu Sayed Md (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Ship breaking is one of the most hazardous and dangerous occupation. Grave concern about the occupational safety and health problems caused by ship dismantling has been widely reported . Whilst many press articles have ...
  • Optimal Planning of Store Allocation and Assignment of Spare Parts in a Warehouse 
    Sultana, Mosammat Ferdaushi (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-09-06)
    Unscientific method of store allocation and assignment of spare parts in warehouse has been one of the major factors that have been causing loss in many companies. To keep pace with the competitors the modern managers ...
  • Optimization of Investment Casting Parameters to Improve the Mechanical Properties by Taguchi Method 
    Mondal, Nil Ratan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    In this present study investment casting process parameter is optimized by using Taguchi approach to improve the mechanical properties of mild steel. A set of experiments were conducted as per Taguchi's L9 orthogonal array ...
  • Optimization of Multi-Item Inventory System 
    Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Inventory is the lifeblood of a business organization. Industry uses various types of materials for its smooth running. A significant amount of total assets is invested as inventory. In many companies, the management has ...
  • Optimization of Sand Casting Parameters for Reducing Casting Defects Using Taguchi Method and Casting Simulation Technique 
    Sultana, Mst. Nazma (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2017-03)
    The aim of the present work is to reduce the rejection rate of cast products in a foundry shop due to casting defects in sand casting process using a statistical tool namely Taguchi method and a computer aided simulation ...
  • Optimization of Vehicle Routing in a Supply Chain 
    Mondol, Md. Kburram Bin Abdul Kayum (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Supply chain is a sequence of organizations- their facilities, functions and activities that are involved in producing and delivering a product or service. The sequence begins with basic suppliers of' raw materials and ...
  • Planning of Ordering Policy for Logistics Department of a Barge Mounted Power Plant 
    Roy, Bhola Nath (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-02-26)
    Today, material management has gained acceptance in all developing economics. As material is nothing but money in the form of goods, each industry uses materials for its smooth running. A Power Plant is a public-interest ...
  • Plant Layout of Cement Industry for Mass Production 
    Alam, Md.Ekhtiar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2010-08)
    Plant layout is the lifeblood of an industry as well as of any cement industry for its manufacturing process and layout design. A cement industry uses various types of machinery and equipment for its smooth operation. ...
  • Predicting the Effects of Process Parameters on Weldment Characteristics in MIG Welding using Artificial Neural Networks 
    Saha, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-12)
    In this project work an attempt has been taken to predicting the effects of process parameters on weldment characteristics in MIG welding with the help of artificial neural network technique. Electrode wire diameter, ...
  • Production of Liquid Fuel from Rice Husk and Sawdust 
    Islam, Md. Kamrul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)
    Energy is the key input to economic growth of a nation and there is a close relation between accessibility of energy and escalation in the quality of nation. As conventional energy sources are limited and will diminish ...
  • Prototype Development of a Joint Padded Metatarsal Cup to Enhance Female Foot Musculoskeletal Safety 
    Jor, Abu (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    This study investigated the feasibility of joint padded metatarsal cup on plantar pressures and stress distribution in the bone alignment of female foot with high heeled footwear during balanced standing. The aim of this ...
  • Pyrolysis of Organic Waste: A Way to Solid Waste Management and Extraction of Fuel 
    Nipa, Farzana Yeasmin (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-06)
    Bangladesh is a developing country and is one of the most densely populated countries in the world. Her per capital energy consumption is also low compared to others. At present, the energy demands are becoming more acute ...
  • Recovery and Characterization of Fuel from Pyrolysis of Medical Wastes: An Alternative Source of Energy 
    Abedeen, Adnan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    Bangladesh is a developing country and one of the most densely populated countries in the world. Energy consumption per capita of this country is also low compared to other developing nations. At present, the energy demands ...
  • Solving Multi-Objective Assignment Problem with Decision Maker’s Preferences by Using Genetic Algorithm 
    Rahman, Md. Mahbubur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-06)
    The multi-objective assignment problem is basically the N men –N tasks problem, where a single task has to be assigned to an individual with a view of optimizing the outcomes. A common challenge is to address the conflicting ...
  • Some Studies on Heat Transfer in Circulating Fluidized Beds 
    Moral, Md. Nawsher Ali (Indian Institute of Technology (IIT), Kharagpur, India, 1990-12)
    Experimental investigations were made to study the effect of fin and vertical probe height on hydrodynamics and heat transfer in circulating fluidized beds (CFB). The experiments were conducted in a 100 mm I.D., 5.15 m ...
  • Studies on Long Term Average Optical Efficiency for Principal Solar Collectors and Shading Factors for Windows 
    Rahman, A. N. M. Mizanur (Indian Institute of Technology (IIT), Kharagpur, India., 1997-09)
    Assessment of techno-economic viabiity of solar energy systems is based on long term performance. The popular design methods for active as wel1 as passive solar energy systems require certain proprocessed parameters in ...
  • Studies on Some Aspects of Electrochemical Grinding 
    Bhowmick, Tarapada (Indian Institute of Technology (IIT), Kharagpur, India, 1999-08)
    Electrochemical grinding (ECG) has become more and more important for its industrial use, in machining problems associated with grinding hard and wear resisting and even very soft electrically conductive materials. In a ...
  • A Study into the Use of the Dysfunction Mode and Effects Critical Analysis (DMECA) in a Power Plant 
    Rahman, Azizur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-01)
    Dysfunction Mode and Effect Critical Analysis (DMECA) is a well-established tool for assessing dysfunctions regarding the quality of maintenance and production processes. It is conceptually same as the Total Quality ...
  • Study of Mechanical Behaviour of Jute Fibre Reinforced Plastics 
    Kazim, K. A. (Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh., 1986-09)
    Some strength characteristics of jute fibres, yarns, fibre bundles, yarn bundles, mats, and jute mat reinforced plastics, have been determined. The hardness, fatigue life, flexural modulus and percentage increase in ...
  • Study on Bio-Fertilizer Extraction and Management of Municipal Solid Waste of Khulna City 
    Adhikary, Debasish (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-12)
    The increasing population of Bangladesh leads to the growth of urban areas and slums which in turn, generating a huge volume of wastes. Thus disposal of waste has become a serious issue. In this project, generation and ...

Search KUET IR


Browse

My Account