Browsing by Title

Sort by: Order: Results:

  • Design and Analysis of a Pattern Reconfigurable Antenna for Wi-Fi Base Station 
    Islam, Md Nazmul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-11)
    A unique concept for design of a pattern reconfigurable antenna and its simulation using CST-MW simulator is presented in this research. The proposed design is a special type of patch antenna and capable to make coverage ...
  • Design and Analysis of Field Oriented Control of Permanent Magnet Brushless DC Motor 
    Islam, Md. Ashraful (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2017-05)
    This research project is about Field Oriented Control strategies for Permanent Magnet Brushless DC (PMBLDC) Motor. In PMBLDC Motor for Field Oriented Control direct axis reference current Id ref is considered zero, ...
  • Design and Analysis of Grid-Connected Hybrid Power Systems Based on Renewable Energy: Bangladesh Perspective 
    Nurunnabi, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-01)
    Current power generation scenarios all over the world are not climate friendly as the generation systems are mainly dependent on fossil fuels that produce greenhouse gas (GHG) which contributes to global warming. This ...
  • Design and Characterization of Photonic Crystal Fiber for Broadband Dispersion Compensation 
    Haque, Md. Mejbaul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2013-10)
    In long range optical fiber communication, dispersion is a major technological challenge that causes broadening of optical pulses when transmitted through the fiber. As a result, it limits the maximum transmission distance ...
  • Design and Characterization of Spiral Photonic Crystal Fiber for Wideband Residual Dispersion Compensation 
    Mondal, Japatosh (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2015-08)
    This thesis presents modeling and analysis of broadband dispersion compensating photonic crystal fibers (DC-PCFs) for dispersion compensation of standard single mode fibers (SMFs). Nearly Zero Dispersion Fiber (NZDF) is ...
  • Design and Demonstration of Smartphone-Based Colorimeter 
    Rani, Saptami (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    In this thesis work, smartphone-based colorimeter is designed and practically implemented utilizing the in-built sensors like CMOS camera, flash LED, and high-power processor of the smartphone. The developed totally ...
  • Design and Implementation of Sampling Rate Conversion System for Electroencephalogram (EEG) on FPGA Device 
    Hassan, Mahamudul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-11)
    The wide scale use of digital communication and digital media has made the necessity of methods to process digital data more important now-a-days. The signal-rate system in digital signal processing has evolved the key ...
  • Design and Performance Analysis of a High-Speed Network Processor 
    Islam, Md. Jahidul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2011-08)
    Network processor is the key architecture of the recent communication technology. Most of the high performance network equipments especially routers, switches and traffic management systems are designed with network ...
  • Design and Performance Study of a Bench-Scale Biological Wastewater Treatment Plant for a Sea Food Processing Industry 
    Debnath, Pronab Kumar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-09)
    Shrimp industries are though important in respect of foreign earnings they are producing huge amount of wastewater that contain large quantities of biodegradable organic wastes and disposed directly to the environment ...
  • Design and Study the Effectiveness of Smart Grid PV System 
    Hossain, Md. Jahangir (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2014-06)
    Sustainable energy sources are required to meet the electricity demand and overcome the threat of energy security. Renewable energy comes forward to solve the above problem. Though there are several sources of renewable ...
  • Design Construction and Performance Test of a Short Length Subsonic Wind Tunnel 
    Arifuzzaman, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2012-09)
    Wind engineering is a field that has been evolving over centuries. Wind engineering is based on using measurements of actual wind flows to predict the forces transferred to engineering structures and machines. A large ...
  • Design of a Novel Electromagnetic Bandgap Structure Assisted Phased Array Antenna 
    Nahid, Elora (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-08)
    With the emergence of novel wireless technologies, the demands for larger bandwidth, high efficiency and high capacity RF and microwave devices have been growing tremendously. Electromagnetic bandgap structures (EBGSs) ...
  • Design of a Power System Stabilizer Using Adaptive Neuro-Fuzzy Logic 
    Ahmed, Moudud (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-05)
    Power systems are large, complex and nonlinear systems, and often exhibit low-frequency power oscillations due to insufficient damping. PSSs are widely used to suppress the electromechanical oscillations of generators ...
  • Design of High Efficiency lnxGa1-xN-Based Multi-Junction Solar Cells 
    Islam, Md. Rafiqul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2006-11)
    Photovoltaic (PV) power generation is becoming widespread as a clean and gentle energy source for the earth. The main drawback of currently used photovoltaic cell is its low conversion efficiency and materials with the ...
  • Design of Symmetric 10 Gbps Bi-Directional Wavelength Reused Optical Access Networks 
    Khan, Tanvir Zaman (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-08)
    This research was conducted to deal with the problem of finding cost‐effective solutions for Fiber‐to‐the‐Home (FTTH) network deployment. In the FTTH network, the transceiver at the user premises and the deployment of ...
  • Detection of Angina Pectoris Using ECG Signals 
    Islam, Md. Merajul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-06)
    Angina pectoris due to ischemia is very crucial to detect because, if it can be detected earlier, doctor can provide the patient proper medication to cure. Sometimes from a long ECG data it is tiresome to calculate and ...
  • Detection of Neural Activity for Cerebrovascular Disease using MRI and EEG 
    Rahman, G. M. Mahmudur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-08)
    (CVD) such as stroke is the leading cause of long-term disability and third most common reason of death in the world. Due to the neuronal deficiency occurred by impaired blood flow to the brain, half of the stroke patients ...
  • Determination of In Situ Soil Density by Sand Cone Method Using Locally Available Sands 
    Rashid, A. B. M. Mamunur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2005-12)
    In Bangladesh Ottawa sand is used to find out in situ soil density using Sand Cone Method. Ottawa sand is very expensive and it is always imported from abroad. Usually it requires much time to import this item. Instead ...
  • Determination of Muscle Activity and Work-Done Through Emg Analysis During Human Movements in Salat 
    Khanam, Farzana (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-05)
    In this thesis, human movements during Salat (the ritual prayer of Muslim) are taken in account to observe this muscle movement patterns as exercise. Since surface electromyography (sEMG) is a proven method to observe the ...
  • Development and Performance Evaluation of Storage Allocation Models in Warehouse 
    Islam, Md. Saiful (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-11)
    Order picking is the most labor-intensive and costly operation in warehouse. Efficient storage assignment rules enormously affect the order picking efficiency. Warehouse managers are concerned about searching for the ...