Browsing by Title

Sort by: Order: Results:

  • Design and Performance Study of a Bench-Scale Biological Wastewater Treatment Plant for a Sea Food Processing Industry 
    Debnath, Pronab Kumar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-09)
    Shrimp industries are though important in respect of foreign earnings they are producing huge amount of wastewater that contain large quantities of biodegradable organic wastes and disposed directly to the environment ...
  • Design and Study the Effectiveness of Smart Grid PV System 
    Hossain, Md. Jahangir (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2014-06)
    Sustainable energy sources are required to meet the electricity demand and overcome the threat of energy security. Renewable energy comes forward to solve the above problem. Though there are several sources of renewable ...
  • Design Construction and Performance Test of a Short Length Subsonic Wind Tunnel 
    Arifuzzaman, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2012-09)
    Wind engineering is a field that has been evolving over centuries. Wind engineering is based on using measurements of actual wind flows to predict the forces transferred to engineering structures and machines. A large ...
  • Design of a Novel Electromagnetic Bandgap Structure Assisted Phased Array Antenna 
    Nahid, Elora (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-08)
    With the emergence of novel wireless technologies, the demands for larger bandwidth, high efficiency and high capacity RF and microwave devices have been growing tremendously. Electromagnetic bandgap structures (EBGSs) ...
  • Design of a Power System Stabilizer Using Adaptive Neuro-Fuzzy Logic 
    Ahmed, Moudud (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-05)
    Power systems are large, complex and nonlinear systems, and often exhibit low-frequency power oscillations due to insufficient damping. PSSs are widely used to suppress the electromechanical oscillations of generators ...
  • Design of High Efficiency lnxGa1-xN-Based Multi-Junction Solar Cells 
    Islam, Md. Rafiqul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2006-11)
    Photovoltaic (PV) power generation is becoming widespread as a clean and gentle energy source for the earth. The main drawback of currently used photovoltaic cell is its low conversion efficiency and materials with the ...
  • Design of Symmetric 10 Gbps Bi-Directional Wavelength Reused Optical Access Networks 
    Khan, Tanvir Zaman (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-08)
    This research was conducted to deal with the problem of finding cost‐effective solutions for Fiber‐to‐the‐Home (FTTH) network deployment. In the FTTH network, the transceiver at the user premises and the deployment of ...
  • Detection of Angina Pectoris Using ECG Signals 
    Islam, Md. Merajul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-06)
    Angina pectoris due to ischemia is very crucial to detect because, if it can be detected earlier, doctor can provide the patient proper medication to cure. Sometimes from a long ECG data it is tiresome to calculate and ...
  • Detection of Neural Activity for Cerebrovascular Disease using MRI and EEG 
    Rahman, G. M. Mahmudur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-08)
    (CVD) such as stroke is the leading cause of long-term disability and third most common reason of death in the world. Due to the neuronal deficiency occurred by impaired blood flow to the brain, half of the stroke patients ...
  • Determination of In Situ Soil Density by Sand Cone Method Using Locally Available Sands 
    Rashid, A. B. M. Mamunur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2005-12)
    In Bangladesh Ottawa sand is used to find out in situ soil density using Sand Cone Method. Ottawa sand is very expensive and it is always imported from abroad. Usually it requires much time to import this item. Instead ...
  • Determination of Muscle Activity and Work-Done Through Emg Analysis During Human Movements in Salat 
    Khanam, Farzana (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2016-05)
    In this thesis, human movements during Salat (the ritual prayer of Muslim) are taken in account to observe this muscle movement patterns as exercise. Since surface electromyography (sEMG) is a proven method to observe the ...
  • Development and Performance Evaluation of Storage Allocation Models in Warehouse 
    Islam, Md. Saiful (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-11)
    Order picking is the most labor-intensive and costly operation in warehouse. Efficient storage assignment rules enormously affect the order picking efficiency. Warehouse managers are concerned about searching for the ...
  • Development of a Laboratory Scale Drainage Wastewater Treatment Plant for Khulna Municipality 
    Sheikh, Md. Rasel (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2017-08)
    Cities in developing countries are experiencing unparalleled growth and rapidly increasing water supply and sanitation coverage that will continue to release growing volumes of wastewater. Wastewater is increasingly being ...
  • Development of a Low Cost Household Level Biological Arsenic-Iron Removal Unit 
    Hossain, Md. Forhad (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2007-06)
    The urban and rural water supply system in Bangladesh is mainly dependent on groundwater. Widespread arsenic contamination and presence of elevated level of iron in groundwater are the major water quality problem in ...
  • Development of a Low Cut-In Speed Wind Turbine 
    Ferdous, Mausumi (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2012-09)
    Wind energy systems have become a focal point in the research of renewable energy sources. In this research provides a new concept of high performance, low cut-in speed wind turbine blade. To design the wind turbine ...
  • Development of a Model to Optimize the Supply Chain Management and it's Application 
    Amin, Md. Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    The mam objective of this research is to develop a mathematical model for supply chain transportation costs. This model consider the real time data of the transportation cost incurring elements which helps in achieving ...
  • Development of a Pilot-Scale Treatment Plant for Market Wastewater of Khulna City 
    Karima, Azrina (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-10)
    developing countries like Bangladesh, urbanization mostly takes place in unplanned and informal way. With high population density and inappropriate construction approach of commercial areas, market wastewater has become ...
  • Development of a Simple Ceramic Membrane Bio-reactor For Wastewater Treatment 
    Golder, Jewel Kumar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2011-10)
    In this study a low cost and simple type ceramic membrane was innovated for concurrent wastewater treatment and reuse. As the MBR processes are still costly in terms of price of membrane, maintenance cost and energy ...
  • Development of a Sustainable Household Surface Water Treatment Filter 
    Aktar, Mst. Nasrin (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-08)
    Potable drinking water is essential for the sustainable existence of the humanity. According to the Word Health Organization (WHO), one third of the world's populations are without access of clean drinking water. The urban ...
  • Development of an Optimal Inventory Management System in Khulna Shipyard Limited- A Case Study 
    Uzzaman, Md. Safiq (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    Inventory, the key component of any organization is the stock of any goods or asset that are required for manufacturing or assembly of the product to maintain the plant. The fundamental function of an inventory system is ...