Abstract:
In long range optical fiber communication, dispersion is a major technological challenge
that causes broadening of optical pulses when transmitted through the fiber. As a result, it
limits the maximum transmission distance and the bit rate. Many efforts have been drawn
to the development of dispersion compensating techniques to mitigate the effect of pulse
broadening. In this thesis, modeling and analysis of broadband dispersion compensating
photonic crystal fibers (DC-PCFs) for dispersion compensation of standard single mode
fibers (SMFs) have been carried out. Three different PCF models such as circular photonic
crystal fiber (C-PCF), modified circular photonic crystal fiber (M-CPCF) and modified
octagonal photonic crystal fiber (M-OPCF) have been designed and their guiding
properties have been analyzed using finite element method (FEM). A perfectly matched
layer (PML) circular boundary is has been used to calculate the confinement loss. The
proposed C-PCF exhibits a high negative dispersion coefficient of about -248.65 to -1069
ps/(nm.km) over the wavelength ranging from 1340 to 1640 nm. It is also demonstrated
that the proposed C-PCF shows an effective dispersion of about ± 0.8 ps/(nm.km) over the
band from 1400 nm to 1610 nm and. However, birefringence of C-PCF is not found so
high and particularly in the order of about 7x10 4 at 1550 nm wavelength. On the other
hand, M-CPCF shows a high negative dispersion coefficient of -203.8 to -835.14
ps/(nm.km) over 1340 to 1640 nm wavelength with a high birefringence of 2.2x102 at
1550 nm wavelength. In addition, the effective dispersion is found less than ± 0.8
ps/(nm.km) over the band from 1400 to 1640 nm. Finally, M-OPCF achieves negative
dispersion coefficient of about -276.27 to -889.21 ps/(nm.km) over 1340 nm to 1640 nm
with a high birefringence of 2.53 xj 2 at 1550 nm wavelength. Moreover, the effective
dispersion is less than ± 0.8 ps/(nm.km) over the band from 1430 to 1610 nm wavelength.
Furthermore, the dispersion slope of the proposed DC-PCFs have been determined and
found negative over the band of interest and residual dispersion slope (RDS) of the
proposed DC —PCFs is achieved equal to that of conventional SMFs of about 0.0036 nm-1
at 1550 nm wavelength. In addition to these, effective area, confinement losses, and
dispersion behavior for fiber's global diameter variations and fiber's structural parameters
variation have been investigated. It has been found that the structural parameters and also
global diameter variations do not affect the dispersion accuracy of the proposed DC-PCFs.
Description:
This thesis is submitted to the Department of Electrical and Electronic Engineering, Khulna University of Engineering & Technology in partial fulfillment of the requirements for the degree of Master of Science in Electrical and Electronic Engineering, October 2013.
Cataloged from PDF Version of Thesis.
Includes bibliographical references.