Department of Mechanical Engineering (ME): Recent submissions

  • Studies on Some Aspects of Electrochemical Grinding 
    Bhowmick, Tarapada (Indian Institute of Technology (IIT), Kharagpur, India, 1999-08)
    Electrochemical grinding (ECG) has become more and more important for its industrial use, in machining problems associated with grinding hard and wear resisting and even very soft electrically conductive materials. In a ...
  • Some Studies on Heat Transfer in Circulating Fluidized Beds 
    Moral, Md. Nawsher Ali (Indian Institute of Technology (IIT), Kharagpur, India, 1990-12)
    Experimental investigations were made to study the effect of fin and vertical probe height on hydrodynamics and heat transfer in circulating fluidized beds (CFB). The experiments were conducted in a 100 mm I.D., 5.15 m ...
  • Laminar Slot Jet and Slot Jet Impingement Heat Transfer 
    Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Predicting the Effects of Process Parameters on Weldment Characteristics in MIG Welding using Artificial Neural Networks 
    Saha, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-12)
    In this project work an attempt has been taken to predicting the effects of process parameters on weldment characteristics in MIG welding with the help of artificial neural network technique. Electrode wire diameter, ...
  • Modeling of Electrochemical Grinding Process 
    Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Numerical Investigation of Stress Field for Anisotropic Elastic Bonded Joints 
    Mamun, A. H. M. Abdullah Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-03)
    In recent years, intelligent or smart structures and systems have drawn more and more attention. Bonded structures are playing a key role as active components in many fields of engineering and technology. Mechanical stress ...
  • Improvement of Aerodynamic Characteristics of an Airfoil by Static Extended Trailing Edge 
    Islam, Md. Shariful (Khulna University of Engineering & Technology (KUET), 2017-04)
    The objective of this work is to study the SETE as an alternative flow control technique for lift enhancement at a small drag penalty in cruise flight. The geometrical quantities, chord distribution and other properties ...
  • Study on Bio-Fertilizer Extraction and Management of Municipal Solid Waste of Khulna City 
    Adhikary, Debasish (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-12)
    The increasing population of Bangladesh leads to the growth of urban areas and slums which in turn, generating a huge volume of wastes. Thus disposal of waste has become a serious issue. In this project, generation and ...

Search KUET IR


Advanced Search

Browse

My Account