dc.contributor.advisor |
Rahman, Prof. Dr. A. N. M. Mizanur |
|
dc.contributor.author |
Islam, Md. Kamrul |
|
dc.date.accessioned |
2019-10-02T11:04:02Z |
|
dc.date.available |
2019-10-02T11:04:02Z |
|
dc.date.copyright |
2019 |
|
dc.date.issued |
2019-05 |
|
dc.identifier.other |
ID 1513504 |
|
dc.identifier.uri |
http://hdl.handle.net/20.500.12228/544 |
|
dc.description |
This thesis is submitted to the Department of Energy Science and Engineering, Khulna University of Engineering & Technology in partial fulfillment of the requirements for the degree of Master of Science in Energy Science and Engineering, May 2019. |
en_US |
dc.description |
Cataloged from PDF Version of Thesis. |
|
dc.description |
Includes bibliographical references (pages 56-62). |
|
dc.description.abstract |
Energy is the key input to economic growth of a nation and there is a close relation between
accessibility of energy and escalation in the quality of nation. As conventional energy sources
are limited and will diminish in future after complete consumption, so it is the high time to deal
with the renewable and non-conventional energy sources. The necessity of liquid fuel is not only
in the transport sector rather it is required in industrial and power sector. Production of liquid
fuel from ligno-cellulosic material is one of the sources of renewable energy. As Bangladesh is
an agricultural country, rice husk and sawdust are the common sources among all sources of
cellulosic material available in the country. In the present study, fermentation method is used to
produce liquid fuel from rice husk and sawdust. For fermentation process simultaneous
saccharification and fermentation (SSF) process being used. In the process, husk and sawdust
was pretreated to neutralize it and then saccharification was carried out with cellulase enzyme
with different proportion where temperature was maintained at around 37oC for 84 hours.
Fermentation reagents were prepared by adding yeast, peptone and dextrose for yeast inoculums.
Saccharified slurry was clutched to fermentation in a mixture of reagents and fermentation
medium. The process was carried out for one day in aerobic condition and then next three days in
anaerobic condition at a temperature of 35oC. After fermenting clear supernatant is obtained
from centrifugation and then gas chromatography (GC) was performed on the product for
estimation of ethanol. In the experimentation rice husk and enzyme mixture was added at the
ratios of 2.5:1, 3:1 and 3.5:1 respectively. The yields of ethanol are respectively 9.55% (v/w),
8.73% (v/w) and 6.74% (v/w) from respective fermented liquid broth. Sawdust and enzyme ratio
of 2.5:1 provide a very low about 1.23% (v/w) of ethanol. This shows that sawdust not
prospective but rice husk is a prospective source of extraction of liquid fuel by fermentation. |
en_US |
dc.description.statementofresponsibility |
Md. Kamrul Islam |
|
dc.format.extent |
62 pages |
|
dc.language.iso |
en_US |
en_US |
dc.publisher |
Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh |
en_US |
dc.rights |
Khulna University of Engineering & Technology (KUET) thesis/dissertation/internship reports are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. |
|
dc.subject |
Liquid Fuel |
en_US |
dc.subject |
Rice Husk |
en_US |
dc.subject |
Sawdust |
en_US |
dc.title |
Production of Liquid Fuel from Rice Husk and Sawdust |
en_US |
dc.type |
Thesis |
en_US |
dc.description.degree |
Master of Science in Energy Science and Engineering |
|
dc.contributor.department |
Department of Energy Science and Engineering |
|