KUET Institutional Repository

Browsing Department of Mechanical Engineering (ME) by Title

Browsing Department of Mechanical Engineering (ME) by Title

Sort by: Order: Results:

  • Laminar Slot Jet and Slot Jet Impingement Heat Transfer 
    Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Modeling of Electrochemical Grinding Process 
    Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Numerical Investigation of Stress Field for Anisotropic Elastic Bonded Joints 
    Mamun, A. H. M. Abdullah Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-03)
    In recent years, intelligent or smart structures and systems have drawn more and more attention. Bonded structures are playing a key role as active components in many fields of engineering and technology. Mechanical stress ...
  • Numerical Modeling on Solid Cone Nozzle without a Vane Swirler 
    Pervin, Mst. Shahin Akter (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2006-12)
    The performance parameters like the coefficient of discharge Cd and the spray cone Angle W of a swirl spray solid cone nozzle without a vane swirler have been studied numerically. The numerical computation of flow through ...
  • Occupational Safety Problems in Bangladesh Ship breaking Industry - a case study 
    Kamruzzaman, Abu Sayed Md (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Ship breaking is one of the most hazardous and dangerous occupation. Grave concern about the occupational safety and health problems caused by ship dismantling has been widely reported . Whilst many press articles have ...
  • Plant Layout of Cement Industry for Mass Production 
    Alam, Md.Ekhtiar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2010-08)
    Plant layout is the lifeblood of an industry as well as of any cement industry for its manufacturing process and layout design. A cement industry uses various types of machinery and equipment for its smooth operation. ...
  • Predicting the Effects of Process Parameters on Weldment Characteristics in MIG Welding using Artificial Neural Networks 
    Saha, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-12)
    In this project work an attempt has been taken to predicting the effects of process parameters on weldment characteristics in MIG welding with the help of artificial neural network technique. Electrode wire diameter, ...
  • Solving Multi-Objective Assignment Problem with Decision Maker’s Preferences by Using Genetic Algorithm 
    Rahman, Md. Mahbubur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-06)
    The multi-objective assignment problem is basically the N men –N tasks problem, where a single task has to be assigned to an individual with a view of optimizing the outcomes. A common challenge is to address the conflicting ...
  • Some Studies on Heat Transfer in Circulating Fluidized Beds 
    Moral, Md. Nawsher Ali (Indian Institute of Technology (IIT), Kharagpur, India, 1990-12)
    Experimental investigations were made to study the effect of fin and vertical probe height on hydrodynamics and heat transfer in circulating fluidized beds (CFB). The experiments were conducted in a 100 mm I.D., 5.15 m ...
  • Studies on Long Term Average Optical Efficiency for Principal Solar Collectors and Shading Factors for Windows 
    Rahman, A. N. M. Mizanur (Indian Institute of Technology (IIT), Kharagpur, India., 1997-09)
    Assessment of techno-economic viabiity of solar energy systems is based on long term performance. The popular design methods for active as wel1 as passive solar energy systems require certain proprocessed parameters in ...
  • Studies on Some Aspects of Electrochemical Grinding 
    Bhowmick, Tarapada (Indian Institute of Technology (IIT), Kharagpur, India, 1999-08)
    Electrochemical grinding (ECG) has become more and more important for its industrial use, in machining problems associated with grinding hard and wear resisting and even very soft electrically conductive materials. In a ...
  • Study of Mechanical Behaviour of Jute Fibre Reinforced Plastics 
    Kazim, K. A. (Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh., 1986-09)
    Some strength characteristics of jute fibres, yarns, fibre bundles, yarn bundles, mats, and jute mat reinforced plastics, have been determined. The hardness, fatigue life, flexural modulus and percentage increase in ...
  • Study on Bio-Fertilizer Extraction and Management of Municipal Solid Waste of Khulna City 
    Adhikary, Debasish (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-12)
    The increasing population of Bangladesh leads to the growth of urban areas and slums which in turn, generating a huge volume of wastes. Thus disposal of waste has become a serious issue. In this project, generation and ...
  • Wear Rate Comparison of Different Impeller Materials for Pumping Various Types of Slurry 
    Karmokar, Sandip (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)
    Erosive wear can as defined as solid deduction process from a solid superficial due to frictional action between the slurry and surface. It is triggered by the effect of solid particles contains by slurry in contradiction ...
  • Wear Rate Comparison of Different Impeller Materials for Pumping Various Types of Slurry 
    Karmokar, Sandip (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)
    Erosive wear can as defined as solid deduction process from a solid superficial due to frictional action between the slurry and surface. It is triggered by the effect of solid particles contains by slurry in contradiction ...

Search KUET IR


Browse

My Account