KUET Institutional Repository

Browsing Department of Mechanical Engineering (ME) by Author "Department of Mechanical Engineering"

Browsing Department of Mechanical Engineering (ME) by Author "Department of Mechanical Engineering"

Sort by: Order: Results:

  • A Cross-sectional Study of Work-Related Musculoskeletal Disorders among Construction Workers in Bangladesh 
    Rahman, Md. Sumon (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    The construction activities are closely associated with many occupational injuries. Work-related musculoskeletal disorders (WMSDs) are the most common occupational injuries faced by construction workers. WMSDs refer to a ...
  • Design Construction and Performance Test of a Short Length Subsonic Wind Tunnel 
    Arifuzzaman, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2012-09)
    Wind engineering is a field that has been evolving over centuries. Wind engineering is based on using measurements of actual wind flows to predict the forces transferred to engineering structures and machines. A large ...
  • Development of a Low Cut-In Speed Wind Turbine 
    Ferdous, Mausumi (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2012-09)
    Wind energy systems have become a focal point in the research of renewable energy sources. In this research provides a new concept of high performance, low cut-in speed wind turbine blade. To design the wind turbine ...
  • Evaluation of qualitative and quantitative techniques in decision-making: A Case Study 
    Pushpo, Faria Haque (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-12)
    This paper represents a brief overview on the evaluation of qualitative and quantitative techniques in decision-making. The purpose of this study was to examine the status and extent to which administrators and engineers ...
  • Experimental Investigation on an Intermittent Ammonia Absorption Refrigeration System 
    Mondal, Dipayan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2014-09)
    This project work describes the experimental investigation on an intermittent ammonia absorption refrigeration system which consists of a generator/ absorber, a condenser, an evaporator and an expansion valve. The system ...
  • Experimental Study of Flow Separation Control on an Airfoil by Suction and Injection 
    Hossain, Md. Farhad (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2010-05)
    In this research a new concept of flow separation control mechanism has been introduced to improve the aerodynamic characteristics of an airfoil. Control of flow separation over an airfoil which experiences a laminar ...
  • Extraction of Pyrolytic Fuel from Nonbiodegradable Solid Waste 
    Ali, Md. Hasan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2013-11)
    Under the project work waste tire and tube of bicycle/rickshaw were converted to useful fuel oil by the process of pyrolysis. In doing so fixed bed lire tube heating pyrolysis technology has been applied. Thermal pyrolysis ...
  • Flow and Heat Transfer Characteristics of Wall Jet over Rough Surfaces 
    Kader, Md. Golam (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2003-01)
    Experimental investigation were carried out to verify the pressure distribution and the local Nusselt number due to circular wall jet over uniformly heated rough flat surfaces. The present investigation shows the ...
  • Flow Separation Control on a NACA 0015 Airfoil using Co-Flow Jet (CFJ) Flow 
    Hossain, Md Amzad (2013-12)
    This thesis describes the effort to experimentally verify the high performance characteristics of the co-flow jet (CFJ) airfoil. The CFJ utilizes tangentially injected air at the leading edge and tangentially removed air ...
  • Impingement Heat Transfer Due to Circular Air Jet Over Rough Flat Surfaces 
    Islam, Md. Nurul (Bangladesh Institute of Technology (BIT), Khulna, 2000-08)
    An experimental investigation was carried out to investigate the pressure distribution and the local and average Nusselt number due to impinging of a circular air jet over uniformly heated rough flat surfaces. The present ...
  • Improvement of Aerodynamic Characteristics of an Airfoil by Static Extended Trailing Edge 
    Islam, Md. Shariful (Khulna University of Engineering & Technology (KUET), 2017-04)
    The objective of this work is to study the SETE as an alternative flow control technique for lift enhancement at a small drag penalty in cruise flight. The geometrical quantities, chord distribution and other properties ...
  • Laminar Slot Jet and Slot Jet Impingement Heat Transfer 
    Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Modeling of Electrochemical Grinding Process 
    Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Numerical Investigation of Stress Field for Anisotropic Elastic Bonded Joints 
    Mamun, A. H. M. Abdullah Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2016-03)
    In recent years, intelligent or smart structures and systems have drawn more and more attention. Bonded structures are playing a key role as active components in many fields of engineering and technology. Mechanical stress ...
  • Numerical Modeling on Solid Cone Nozzle without a Vane Swirler 
    Pervin, Mst. Shahin Akter (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2006-12)
    The performance parameters like the coefficient of discharge Cd and the spray cone Angle W of a swirl spray solid cone nozzle without a vane swirler have been studied numerically. The numerical computation of flow through ...
  • Occupational Safety Problems in Bangladesh Ship breaking Industry - a case study 
    Kamruzzaman, Abu Sayed Md (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Ship breaking is one of the most hazardous and dangerous occupation. Grave concern about the occupational safety and health problems caused by ship dismantling has been widely reported . Whilst many press articles have ...
  • Plant Layout of Cement Industry for Mass Production 
    Alam, Md.Ekhtiar (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2010-08)
    Plant layout is the lifeblood of an industry as well as of any cement industry for its manufacturing process and layout design. A cement industry uses various types of machinery and equipment for its smooth operation. ...
  • Predicting the Effects of Process Parameters on Weldment Characteristics in MIG Welding using Artificial Neural Networks 
    Saha, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-12)
    In this project work an attempt has been taken to predicting the effects of process parameters on weldment characteristics in MIG welding with the help of artificial neural network technique. Electrode wire diameter, ...
  • Solving Multi-Objective Assignment Problem with Decision Maker’s Preferences by Using Genetic Algorithm 
    Rahman, Md. Mahbubur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-06)
    The multi-objective assignment problem is basically the N men –N tasks problem, where a single task has to be assigned to an individual with a view of optimizing the outcomes. A common challenge is to address the conflicting ...
  • Some Studies on Heat Transfer in Circulating Fluidized Beds 
    Moral, Md. Nawsher Ali (Indian Institute of Technology (IIT), Kharagpur, India, 1990-12)
    Experimental investigations were made to study the effect of fin and vertical probe height on hydrodynamics and heat transfer in circulating fluidized beds (CFB). The experiments were conducted in a 100 mm I.D., 5.15 m ...

Search KUET IR


Browse

My Account