dc.contributor.advisor |
Uddin, Prof. Dr. Md. Kutub |
|
dc.contributor.author |
Rahman, Md. Mahbubur |
|
dc.date.accessioned |
2019-07-21T10:17:20Z |
|
dc.date.available |
2019-07-21T10:17:20Z |
|
dc.date.copyright |
2019 |
|
dc.date.issued |
2019-06 |
|
dc.identifier.other |
ID 1505506 |
|
dc.identifier.uri |
http://hdl.handle.net/20.500.12228/522 |
|
dc.description |
This thesis is submitted to the Department of Mechanical Engineering, Khulna University of Engineering & Technology in partial fulfillment of the requirements for the degree of Master of Science in Mechanical Engineering, June 2019. |
en_US |
dc.description |
Cataloged from PDF Version of Thesis. |
|
dc.description |
Includes bibliographical references (pages 43-45). |
|
dc.description.abstract |
The multi-objective assignment problem is basically the N men –N tasks problem, where a single task has to be assigned to an individual with a view of optimizing the outcomes. A common challenge is to address the conflicting objectives which produce Pareto–optimal solutions. The main feature of the work is- normalizing all the criteria into a single scale regardless of their measurement units and their demand of minimum or maximum, which reliefs the researchers from careful attention in quantifying the quality criteria. The methodology also included the decision maker’s preferences regarding the objectives. While solving the problem through a genetic algorithm, a new encoding scheme is used together with a partially matched crossover (PMX). The working principle of the proposed algorithm is illustrated with a numerical example and its effectiveness has been compared with some well-established methodologies. It is found that the proposed algorithm provides a better solution with minimal computational effort. |
en_US |
dc.description.statementofresponsibility |
Md. Mahbubur Rahman |
|
dc.format.extent |
57 pages |
|
dc.language.iso |
en_US |
en_US |
dc.publisher |
Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh |
en_US |
dc.rights |
Khulna University of Engineering & Technology (KUET) thesis/dissertation/internship reports are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. |
|
dc.subject |
Assignment Problem |
en_US |
dc.subject |
Multi-Objective |
en_US |
dc.subject |
Decision Maker’s Preferences |
en_US |
dc.subject |
Genetic Algorithm |
en_US |
dc.title |
Solving Multi-Objective Assignment Problem with Decision Maker’s Preferences by Using Genetic Algorithm |
en_US |
dc.type |
Thesis |
en_US |
dc.description.degree |
Master of Science in Mechanical Engineering |
|
dc.contributor.department |
Department of Mechanical Engineering |
|