KUET Institutional Repository

Browsing Faculty of Mechanical Engineering by Title

Browsing Faculty of Mechanical Engineering by Title

Sort by: Order: Results:

  • Effect of External Shading and Window Glazing on Energy Consumption of Buildings in Bangladesh 
    Alam, Md. Jahangir (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2014-09)
    Energy efficiency of buildings is attracting significant attention from the research community as the world is moving towards sustainable buildings design. Energy efficient approaches are measures or ways to improve the ...
  • Effect of Surfactant on Water Vapor Absorption into Aqueous Lithium Bromide 
    Bari, Md. Abdullah Al (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2012-09)
    The objective of the present study is to investigate the absorbing characteristics of water vapor in LiBr-H2O (weak solution) and also the enhancement of absorption in presence of a surfactant in the absorber of a vapor ...
  • Effect of Various Operating Parameters on Power Generation from Mediator Less Microbial Fuel Cell 
    Halim, Md. Abdul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-05)
    Microbial fuel cell (MFC) is the most adaptable renewable energy technology for its multidimensional applications. This bioreactor converts the chemical energy stored in decomposable organic and inorganic compound into ...
  • The Effects of Car A-Pillar and Windshield Geometry on Local Flow and Noise 
    Alam, Dr. Firoz (RMIT University, Melbourne, Australia., 2000-09)
    A desirable requirement in the production of modern vehicles world-wide is the provision of a high level of driving comfort. An important aspect of this is the minimisation of aerodynamic noise. As structure-borne, engine, ...
  • Evaluation of qualitative and quantitative techniques in decision-making: A Case Study 
    Pushpo, Faria Haque (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-12)
    This paper represents a brief overview on the evaluation of qualitative and quantitative techniques in decision-making. The purpose of this study was to examine the status and extent to which administrators and engineers ...
  • Experimental Investigation on an Intermittent Ammonia Absorption Refrigeration System 
    Mondal, Dipayan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2014-09)
    This project work describes the experimental investigation on an intermittent ammonia absorption refrigeration system which consists of a generator/ absorber, a condenser, an evaporator and an expansion valve. The system ...
  • Experimental Study of Flow Separation Control on an Airfoil by Suction and Injection 
    Hossain, Md. Farhad (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2010-05)
    In this research a new concept of flow separation control mechanism has been introduced to improve the aerodynamic characteristics of an airfoil. Control of flow separation over an airfoil which experiences a laminar ...
  • Extraction of Biodiesel from Castor Oil and Study of Its Properties 
    Rahman, Mohammad Siddiqur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2017-02)
    Energy demand is increasing worldwide with expected fossil fuel shortages, alternative energy resources need to be explored. Moreover, the high fossil energy utilization with its unfavorable impact on environment and ...
  • Extraction of Biodiesel from Castor Oil and Study of Its Properties 
    Rahman, Mohammad Siddiqur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2017-02)
    Energy demand is increasing worldwide with expected fossil fuel shortages, alternative energy resources need to be explored. Moreover, the high fossil energy utilization with its unfavorable impact on environment and ...
  • Extraction of Liquid Fuel from Pyrolysis of Waste Tyres with Catalyst 
    Hossain, Md. Shameem (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2015-10)
    Bangladesh is a developing and most densely populated country in the world with a total population of about 156.6 million. Her per capita energy consumption is much below the world average. Energy consumption mix is ...
  • Extraction of Pyrolytic Fuel from Nonbiodegradable Solid Waste 
    Ali, Md. Hasan (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2013-11)
    Under the project work waste tire and tube of bicycle/rickshaw were converted to useful fuel oil by the process of pyrolysis. In doing so fixed bed lire tube heating pyrolysis technology has been applied. Thermal pyrolysis ...
  • Flow and Heat Transfer Characteristics of Wall Jet over Rough Surfaces 
    Kader, Md. Golam (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2003-01)
    Experimental investigation were carried out to verify the pressure distribution and the local Nusselt number due to circular wall jet over uniformly heated rough flat surfaces. The present investigation shows the ...
  • Flow Separation Control on a NACA 0015 Airfoil using Co-Flow Jet (CFJ) Flow 
    Hossain, Md Amzad (2013-12)
    This thesis describes the effort to experimentally verify the high performance characteristics of the co-flow jet (CFJ) airfoil. The CFJ utilizes tangentially injected air at the leading edge and tangentially removed air ...
  • Impingement Heat Transfer Due to Circular Air Jet Over Rough Flat Surfaces 
    Islam, Md. Nurul (Bangladesh Institute of Technology (BIT), Khulna, 2000-08)
    An experimental investigation was carried out to investigate the pressure distribution and the local and average Nusselt number due to impinging of a circular air jet over uniformly heated rough flat surfaces. The present ...
  • Improvement of Aerodynamic Characteristics of an Airfoil by Static Extended Trailing Edge 
    Islam, Md. Shariful (Khulna University of Engineering & Technology (KUET), 2017-04)
    The objective of this work is to study the SETE as an alternative flow control technique for lift enhancement at a small drag penalty in cruise flight. The geometrical quantities, chord distribution and other properties ...
  • Laminar Slot Jet and Slot Jet Impingement Heat Transfer 
    Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Modeling and Analysis of Labour Cost Estimation for Ship Repairing: A Case Study in Chittagong Dry Dock Limited 
    Karim, Mohammad Sajedul (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2019-12)
    With the increase of international trade activities through sea and resulting exponential growth of number of ships calling on coastal nations’ ports, ship repair is becoming an increasingly attractive opportunity for ...
  • Modeling of Electrochemical Grinding Process 
    Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Modeling to Integrate the International Standards with Total Quality Management Philosophy 
    Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2021-01)
    The aim of the present study is to develop an Integrated Management System (IMS) and its implementation framework for RMG industries of Bangladesh. RMG industries are using several management standards in their organizations ...
  • A New Concept in Modern Industry Sector, “Virtual Industry Model” 
    Badiuzzaman, Md. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2018-12)
    Virtual office has become a popular and desired office management system for technologybased low-cost office management system. This virtual management system is a new way of working that enables the virtual worker to ...

Search KUET IR


Browse

My Account