KUET Institutional Repository

Browsing Faculty of Mechanical Engineering by Issue Date

Browsing Faculty of Mechanical Engineering by Issue Date

Sort by: Order: Results:

  • Study of Mechanical Behaviour of Jute Fibre Reinforced Plastics 
    Kazim, K. A. (Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh., 1986-09)
    Some strength characteristics of jute fibres, yarns, fibre bundles, yarn bundles, mats, and jute mat reinforced plastics, have been determined. The hardness, fatigue life, flexural modulus and percentage increase in ...
  • Some Studies on Heat Transfer in Circulating Fluidized Beds 
    Moral, Md. Nawsher Ali (Indian Institute of Technology (IIT), Kharagpur, India, 1990-12)
    Experimental investigations were made to study the effect of fin and vertical probe height on hydrodynamics and heat transfer in circulating fluidized beds (CFB). The experiments were conducted in a 100 mm I.D., 5.15 m ...
  • Laminar Slot Jet and Slot Jet Impingement Heat Transfer 
    Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Studies on Long Term Average Optical Efficiency for Principal Solar Collectors and Shading Factors for Windows 
    Rahman, A. N. M. Mizanur (Indian Institute of Technology (IIT), Kharagpur, India., 1997-09)
    Assessment of techno-economic viabiity of solar energy systems is based on long term performance. The popular design methods for active as wel1 as passive solar energy systems require certain proprocessed parameters in ...
  • Studies on Some Aspects of Electrochemical Grinding 
    Bhowmick, Tarapada (Indian Institute of Technology (IIT), Kharagpur, India, 1999-08)
    Electrochemical grinding (ECG) has become more and more important for its industrial use, in machining problems associated with grinding hard and wear resisting and even very soft electrically conductive materials. In a ...
  • Impingement Heat Transfer Due to Circular Air Jet Over Rough Flat Surfaces 
    Islam, Md. Nurul (Bangladesh Institute of Technology (BIT), Khulna, 2000-08)
    An experimental investigation was carried out to investigate the pressure distribution and the local and average Nusselt number due to impinging of a circular air jet over uniformly heated rough flat surfaces. The present ...
  • The Effects of Car A-Pillar and Windshield Geometry on Local Flow and Noise 
    Alam, Dr. Firoz (RMIT University, Melbourne, Australia., 2000-09)
    A desirable requirement in the production of modern vehicles world-wide is the provision of a high level of driving comfort. An important aspect of this is the minimisation of aerodynamic noise. As structure-borne, engine, ...
  • Flow and Heat Transfer Characteristics of Wall Jet over Rough Surfaces 
    Kader, Md. Golam (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2003-01)
    Experimental investigation were carried out to verify the pressure distribution and the local Nusselt number due to circular wall jet over uniformly heated rough flat surfaces. The present investigation shows the ...
  • Numerical Modeling on Solid Cone Nozzle without a Vane Swirler 
    Pervin, Mst. Shahin Akter (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2006-12)
    The performance parameters like the coefficient of discharge Cd and the spray cone Angle W of a swirl spray solid cone nozzle without a vane swirler have been studied numerically. The numerical computation of flow through ...
  • Planning of Ordering Policy for Logistics Department of a Barge Mounted Power Plant 
    Roy, Bhola Nath (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-02-26)
    Today, material management has gained acceptance in all developing economics. As material is nothing but money in the form of goods, each industry uses materials for its smooth running. A Power Plant is a public-interest ...
  • Modeling of Electrochemical Grinding Process 
    Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Occupational Safety Problems in Bangladesh Ship breaking Industry - a case study 
    Kamruzzaman, Abu Sayed Md (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Ship breaking is one of the most hazardous and dangerous occupation. Grave concern about the occupational safety and health problems caused by ship dismantling has been widely reported . Whilst many press articles have ...
  • Application of Supply Chain Management in a Local Manufacturing Company and to Assess its Impacts On Performance of the Organization 
    Ali, Sk. Mohammad (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-01)
    A supply chain consists of all stages involved directly or indirectly, in fulfilling a customer request. The supply chain not only includes the manufacturer and suppliers but also transporters, warehouses, retailers, ...
  • Application of TQM Principles & Tools in a Carpet Backward linkage (carpet Backing Cloth, Abbreviated cbc) Industry and to Measure it's Impacts on Customer Satisfaction 
    Hadid, Md. Abu (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-01)
    Total Quality Management (TQM) is an enhancement to the traditional way of doing business. It is a proven technique to guarantee survival in world-class competition. TQM provides a quality product and/or service to ...
  • Optimal Planning of Store Allocation and Assignment of Spare Parts in a Warehouse 
    Sultana, Mosammat Ferdaushi (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-09-06)
    Unscientific method of store allocation and assignment of spare parts in warehouse has been one of the major factors that have been causing loss in many companies. To keep pace with the competitors the modern managers ...
  • A Study into the Use of the Dysfunction Mode and Effects Critical Analysis (DMECA) in a Power Plant 
    Rahman, Azizur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-01)
    Dysfunction Mode and Effect Critical Analysis (DMECA) is a well-established tool for assessing dysfunctions regarding the quality of maintenance and production processes. It is conceptually same as the Total Quality ...
  • Analysis of the Major Causes of Accident and Standardize the Safety Measures for the Electricity Distribution System. 
    Islam, Md. Siful (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-03)
    Electricity distribution is a vast sector and it is stretched out over the whole country. Huge quantity of distribution line, line equipment, workers and public are involved in the system. The activities of the distribution ...
  • Application of Total Quality Management Principles in a Power Plant 
    Khan, Md. Arif Reza (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-08-21)
    Bangladesh Power Development Board (BPDB) is the most important and largest organization of Bangladesh in power sector. Once. total electricity generation, transmission and distribution was under control of BPDB. But ...
  • Optimization of Multi-Item Inventory System 
    Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Inventory is the lifeblood of a business organization. Industry uses various types of materials for its smooth running. A significant amount of total assets is invested as inventory. In many companies, the management has ...
  • Sustainable Disaster Management in Coastal Areas of Bangladesh 
    Sabur, Abu Naim Muhammad Abdus (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Bangladesh is a country that has been intrinsically associated with natural disaster and vulnerability. Bangladesh's geographical vulnerability lies in the fact that it is an exceedingly flat,low-lying, alluvial plain ...

Search KUET IR


Browse

My Account