KUET Institutional Repository

Browsing Faculty of Mechanical Engineering by Issue Date

Browsing Faculty of Mechanical Engineering by Issue Date

Sort by: Order: Results:

  • Kazim, K. A. (Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh., 1986-09)
    Some strength characteristics of jute fibres, yarns, fibre bundles, yarn bundles, mats, and jute mat reinforced plastics, have been determined. The hardness, fatigue life, flexural modulus and percentage increase in ...
  • Moral, Md. Nawsher Ali (Indian Institute of Technology (IIT), Kharagpur, India, 1990-12)
    Experimental investigations were made to study the effect of fin and vertical probe height on hydrodynamics and heat transfer in circulating fluidized beds (CFB). The experiments were conducted in a 100 mm I.D., 5.15 m ...
  • Hossain, Khandkar Aftab (Indian Institute of Technology (IIT), Kharagpur, India., 1996)
    In this investigation, the numerical solutions of Navier-Stokes equations and energy equation are presented for (1) laminar free slot jet, (ii) laminar free axisymmetric jet, (iii) laminar jet impingement on a circular ...
  • Rahman, A. N. M. Mizanur (Indian Institute of Technology (IIT), Kharagpur, India., 1997-09)
    Assessment of techno-economic viabiity of solar energy systems is based on long term performance. The popular design methods for active as wel1 as passive solar energy systems require certain proprocessed parameters in ...
  • Bhowmick, Tarapada (Indian Institute of Technology (IIT), Kharagpur, India, 1999-08)
    Electrochemical grinding (ECG) has become more and more important for its industrial use, in machining problems associated with grinding hard and wear resisting and even very soft electrically conductive materials. In a ...
  • Islam, Md. Nurul (Bangladesh Institute of Technology (BIT), Khulna, 2000-08)
    An experimental investigation was carried out to investigate the pressure distribution and the local and average Nusselt number due to impinging of a circular air jet over uniformly heated rough flat surfaces. The present ...
  • Alam, Dr. Firoz (RMIT University, Melbourne, Australia., 2000-09)
    A desirable requirement in the production of modern vehicles world-wide is the provision of a high level of driving comfort. An important aspect of this is the minimisation of aerodynamic noise. As structure-borne, engine, ...
  • Kader, Md. Golam (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh., 2003-01)
    Experimental investigation were carried out to verify the pressure distribution and the local Nusselt number due to circular wall jet over uniformly heated rough flat surfaces. The present investigation shows the ...
  • Pervin, Mst. Shahin Akter (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2006-12)
    The performance parameters like the coefficient of discharge Cd and the spray cone Angle W of a swirl spray solid cone nozzle without a vane swirler have been studied numerically. The numerical computation of flow through ...
  • Roy, Bhola Nath (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-02-26)
    Today, material management has gained acceptance in all developing economics. As material is nothing but money in the form of goods, each industry uses materials for its smooth running. A Power Plant is a public-interest ...
  • Asaduzzaman, B. M. (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Electrochemical Grinding (ECG) process is a mechanically assisted electro-chemical process for material processing. The process is able to successfully machine electrically conducting harder materials at faster rate with ...
  • Kamruzzaman, Abu Sayed Md (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2007-12)
    Ship breaking is one of the most hazardous and dangerous occupation. Grave concern about the occupational safety and health problems caused by ship dismantling has been widely reported . Whilst many press articles have ...
  • Ali, Sk. Mohammad (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-01)
    A supply chain consists of all stages involved directly or indirectly, in fulfilling a customer request. The supply chain not only includes the manufacturer and suppliers but also transporters, warehouses, retailers, ...
  • Hadid, Md. Abu (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-01)
    Total Quality Management (TQM) is an enhancement to the traditional way of doing business. It is a proven technique to guarantee survival in world-class competition. TQM provides a quality product and/or service to ...
  • Sultana, Mosammat Ferdaushi (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2008-09-06)
    Unscientific method of store allocation and assignment of spare parts in warehouse has been one of the major factors that have been causing loss in many companies. To keep pace with the competitors the modern managers ...
  • Rahman, Azizur (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-01)
    Dysfunction Mode and Effect Critical Analysis (DMECA) is a well-established tool for assessing dysfunctions regarding the quality of maintenance and production processes. It is conceptually same as the Total Quality ...
  • Islam, Md. Siful (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-03)
    Electricity distribution is a vast sector and it is stretched out over the whole country. Huge quantity of distribution line, line equipment, workers and public are involved in the system. The activities of the distribution ...
  • Khan, Md. Arif Reza (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-08-21)
    Bangladesh Power Development Board (BPDB) is the most important and largest organization of Bangladesh in power sector. Once. total electricity generation, transmission and distribution was under control of BPDB. But ...
  • Talapatra, Subrata (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Inventory is the lifeblood of a business organization. Industry uses various types of materials for its smooth running. A significant amount of total assets is invested as inventory. In many companies, the management has ...
  • Sabur, Abu Naim Muhammad Abdus (Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh, 2009-09)
    Bangladesh is a country that has been intrinsically associated with natural disaster and vulnerability. Bangladesh's geographical vulnerability lies in the fact that it is an exceedingly flat,low-lying, alluvial plain ...

Search KUET IR


Browse

My Account